EdgeRouter - Destination NAT
1. Add a Destination NAT rule for TCP port 2200, referencing the primary WAN IP address.
- Firewall / NAT -- NAT -- +Add Destination NAT Rule
Description: NAT2200
Inbound Interface: eth0
Translation Address: 192.168.1.200
Translation Port: 2200
Protocol: TCP
Destination Address: 192.168.10.2
Destination Port: 2200
2. Add a Destination NAT rule for TCP port 2200, referencing the secondary WAN IP address.
Firewall / NAT -- NAT -- +Add Destination NAT Rule
Description: NAT2200
Inbound Interface: eth1
Translation Address: 192.168.1.200
Translation Port: 2200
Protocol: TCP
Destination Address: 192.168.20.3
Destination Port: 2200
3. Add a firewall rule that allows the 2200 port traffic to reach the server.
Firewall/NAT - Firewall Policies - WAN_IN - Actions - Edit Ruleset - Add New Rule
Description: 2200
Action: Accept
Protocol: TCP
Destination - Port: 2200
إرسال تعليق